Auerswald COMpact 5000R Advanced Information Download Page 812

Page: 812 / 1388

Exchange Line Settings

COMpact 5000/R - Firmware V7.4A - Advanced Information V13 06/2019

- 812 -

• Exchange line authorisation allows at least emergency calls
• Configured contact group

Annuaire version 1

- Using the Configuration Manager (page

Données des utilisateurs

> Carnets d’adresses

)

Aucune

All group members logged in as outgoing have no phone book

authorisation

Oui

All group members logged in as outgoing can dial the phone numbers

entered in the contact group

Annuaire version 1

irrespective of his

exchange line authorisation. So it extends the exchange line authorisation.

Comme les abonnés

The phone book authorisation activated for a subscriber is used.

Ligne privilégiée Experts

Defines via which exchange line outgoing external calls will be routed by a

group member logged in as outgoing.

Occupation automatique

For outgoing external calls, any available connection is used, whereby first

the fixed network connections and then the VoIP connection and at last

the GSM connections were taken into account.

Lignes privilégiées spéciales

For outgoing external calls, the connections released under

Experts

are

used depending on the selected priority. This makes the definition of a

preferred exchange line (priority = 1) with overflow to other connections

(priority > 1) possible. Exchange lines with priority

Aucune attribution

automatique

are not used for outgoing calls.

Summary of Contents for COMpact 5000R













































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































Search results

Summary of Contents for COMpact 5000R

Reviews:

Related manuals for COMpact 5000R

Brands by name

Popular brands

Auerswald COMpact 5000R, Advanced Information

Search results

Summary of Contents for COMpact 5000R

Reviews:

Related manuals for COMpact 5000R

Brands by name

Popular brands