manualshive.com logo in svg

Auerswald COMpact 5000R, Advanced Information, Page: 886 / 1388

Share
Download
Auerswald COMpact 5000R Advanced Information Download Page 886

Call Acceptance/Announcements

COMpact 5000/R - Firmware V7.4A - Advanced Information V13 06/2019

- 886 -

Note:

 The voice mailbox only records calls for which a caller leaves a

message (of more than two seconds).

Call-specific behaviour (exception table)

The call acceptance of the voice mailbox can be configured to show

different behaviour for different call types.

Note:

 If the call-specific behaviour is permanently set in a

configuration by means of a profile, the corresponding table can be
viewed. Click the corresponding profile name which is displayed in red
font. The corresponding profile configuration is displayed.

 
Requirements:
• Separately for voice mailboxes
• Separately for configurations
• Using the Configuration Manager

Note:

 This setting is also possible configuration-dependent via profiles

(

Périphériques > Boîtes de messagerie vocale/télécopie > Profils >

Configuration > Consulter

).

Type d’appel
appels anonymes

Call acceptance for calls without transferred phone number.

appels internes

Call acceptance for internal calls.

Summary of Contents for COMpact 5000R













































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































Reviews:

No comments