Auerswald COMpact 5000R Advanced Information Download Page 735

Page: 735 / 1388

Voicemail/ Fax Box

COMpact 5000/R - Firmware V7.4A - Advanced Information V13 06/2019

- 735 -

The voice mailbox will be called after expiration of the entered delay time.

si occupé

The voice mailbox will be called if the internal number of the subscriber

is busy and if no call forwarding on busy has been enabled for the

subscriber.

on no reply + on busy

The voice mailbox will be called if the subscriber does not reply or if the

internal number of the subscriber is busy.

Appel informatif (fonction de messagerie vocale)

The arrival of new voice messages immediately after completion of

the recording will be signaled by a call from the voice mailbox to the

subscriber. When this is done, the phone number or name of the voice

mailbox is shown on the phone display.

Note:

COMfortel system phones (ISDN, VoIP) do not receive info calls.

New voice message are displayed on these phones via LED signalling
(e. g. message button).

Summary of Contents for COMpact 5000R













































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































Search results

Summary of Contents for COMpact 5000R

Reviews:

Related manuals for COMpact 5000R

Brands by name

Popular brands

Auerswald COMpact 5000R, Advanced Information

Search results

Summary of Contents for COMpact 5000R

Reviews:

Related manuals for COMpact 5000R

Brands by name

Popular brands