Auerswald COMpact 5000R Advanced Information Download Page 193

Page: 193 / 1388

Number Presentation

COMpact 5000/R - Firmware V7.4A - Advanced Information V13 06/2019

- 193 -

Number Presentation

With the number presentation (outgoing), it is possible to select the

number presented to the partner called. A different number may be

presented for a business or a private call or for a call as a member of a

group (logged into the group as outgoing).
The suppression of the number presentation (outgoing) can prevent the

presentation of your own number to the partner called (anonymous call).

This feature allows you to decide before starting a call if the number

should be presented to the partner called or not. The number from your

own connection can still be transmitted to the network provider so that the

charges can be calculated correctly.
The number presentation (incoming) lets you present the actual number

reached to the incoming caller. The number presented back to you may

be one of the numbers from the exchange line connection reached. This

number may be different than the number actually dialled by the caller.

This is useful if, for example, another subscriber takes the call via pick-up

or call forwarding is active. The number to be presented back may also be

suppressed (COLR).
With the number presentation (internal) for group calls, it is possible

to select the number which is presented when a subscriber makes an

internal call as a group member.

Note:

The function can be configured via keypad codes (depending on

the provider) via the keypad of the phone.

Proceed as follows for configuration:

• Configuring the number presentation (outgoing) and (incoming) and

number suppression.
- Using the Configuration Manager (on the following pages)

Summary of Contents for COMpact 5000R













































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































Search results

Summary of Contents for COMpact 5000R

Reviews:

Auerswald COMpact 5000R, Advanced Information, Page: 193 / 1388

Search results

Summary of Contents for COMpact 5000R

Reviews: