Auerswald COMpact 5000R Advanced Information Download

Page: 635 / 1388

SIP

COMpact 5000/R - Firmware V7.4A - Advanced Information V13 06/2019

- 635 -

Note:

SRTP is used to encrypt call data.

Désactiver la vérification du nom d’hôte

No verification whether the certificate belongs to the domain/IP.

Gérer les certificats

Opens the certificates management.

Transport SIP

Selection of the transport protocol.

Protocole IP
IPv4

IPv4 operating mode is used for communications with the VoIP provider.

IPv6

IPv6 operating mode is used for communications with the VoIP provider.

automatique

The PBX first checks whether the VoIP provider supports IPv6. If so,

operating mode IPv6 is used for communications with the VoIP provider.

Otherwise, operating mode IPv4 is used.

Note:

If the actual IP operating mode is IPv6, STUN cannot be used

as a NAT method either for SIP or RTP.

Sécurité accrue

The provider provides better levels of security to protect the PBX against

external attacks.

Summary of Contents for COMpact 5000R













































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































Search results

Summary of Contents for COMpact 5000R

Reviews:

Related manuals for COMpact 5000R

Brands by name

Popular brands

Auerswald COMpact 5000R, Advanced Information

Search results

Summary of Contents for COMpact 5000R

Reviews:

Related manuals for COMpact 5000R

Brands by name

Popular brands