manualshive.com logo in svg

Auerswald COMpact 5000R, Advanced Information, Page: 587 / 1388

Share
Download
Auerswald COMpact 5000R Advanced Information Download Page 587

Transfert d’appel

COMpact 5000/R - Firmware V7.4A - Advanced Information V13 06/2019

- 587 -

Important:

 In Switzerland, the configuration of a call forwarding is

chargeable. To avoid costs, the check box must be disabled.

Delay time for Call Forwarding on no reply in the PBX 

This delay time for external numbers specifies the time (in seconds) after

which a call is forwarded if the called subscriber does not respond.

Note:

 When switched off, the waiting time applies only to call

forwarding that was set up using the PBX. If the network provider has
configured the call forwarding function, the waiting time depends on their
settings and cannot be configured in the PBX.

Routing via exception numbers (VoIP + GSM)

Requirements:
• Configured exception numbers (page 

Routage > Routage VoIP/GSM

> Numéros de téléphone d’exception

)

• Enabled call forwarding method 

2. B channel

The device checks whether the destination number involved in call

forwarding for external numbers has been set up as an exception number.

If so, the call is sent along the configured path. If the destination number

has not been entered in the routing table, the call to be forwarded is sent

either via a free call channel that is assigned to the port or via any free

call channel (

For call forwarding via the PBX, use any available call

channel

).

SETTINGS FOR CALL FORWARDING METHODS CF/CR/CD FACILITY

Summary of Contents for COMpact 5000R













































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































Reviews:

No comments