Auerswald COMpact 5000R Advanced Information Download Page 201

Page: 201 / 1388

Call Forwarding for Groups

COMpact 5000/R - Firmware V7.4A - Advanced Information V13 06/2019

- 201 -

rerouted phone number is neither called as a group member, nor is it
required to consider parallel calling or fallback on busy.

Proceed as follows for configuration:

• Switching authorisations for the involved internal subscribers on.

- Using the Configuration Manager (page

Abonnés (Abo) >

Propriétés > Droits

)

Note:

The forwarding subscriber needs an authorisation e.g. for group

call forwardings. For configuring using a character string on an internal
phone the subscriber needs an authorisation for controlling of the PBX.

• Configuring sufficient exchange line authorisations for the involved

internal subscribers.
- Using the Configuration Manager (page

Abonnés (Abo) >

Propriétés > Paramètres de ligne

)

Note:

The destination subscriber needs a sufficient exchange line

authorisation for taking external calls.

• Switching call forwarding on.

- Using the Configuration Manager (page

Groupes > Propriétés >

Disponibilité

)

- Using a character string on the internal phone (see

Call

Forwarding for Groups

)

• Making additional settings for call forwarding.

- Using the Configuration Manager (page

Groupes > Propriétés >

Disponibilité

)

Summary of Contents for COMpact 5000R













































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































Search results

Summary of Contents for COMpact 5000R

Reviews:

Auerswald COMpact 5000R, Advanced Information, Page: 201 / 1388

Search results

Summary of Contents for COMpact 5000R

Reviews: