Auerswald COMpact 5000R Advanced Information Download

Page: 1238 / 1388

Management Logo

COMpact 5000/R - Firmware V7.4A - Advanced Information V13 06/2019

- 1238 -

Management Logo

The PBX supports any number of logos (limited by the total memory).

These can be freely assigned to individual e-mail functions of the PBX

(system e-mails, forwarding of voice mail and fax messages).
Proceed as follows for configuration:
• Using the Configuration Manager (page

Administration > Courrier

électronique > Gestion des logos

)

Importer

Note:

The logo must have the file format *.jpg and should have a size

of 160 x 60 pixels (width x height).

Note:

The file may have a size of 50 kB max. The memory for all logos

is limited to 500 kB.

Note:

If do not import your own logo, the Auerswald/FONtevo logo

included in the scope of supply will be used.

Select and import an image file (*.jpg) that is stored on a data storage

device (PC).

Supprimer

Deletes the entries marked in the list.

«
...
1236
1237
1238
1239
1240
...
»

Summary of Contents for COMpact 5000R













































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































Search results

Summary of Contents for COMpact 5000R

Reviews:

Related manuals for COMpact 5000R

Brands by name

Popular brands

Auerswald COMpact 5000R, Advanced Information

Search results

Summary of Contents for COMpact 5000R

Reviews:

Related manuals for COMpact 5000R

Brands by name

Popular brands