manualshive.com logo in svg

Auerswald COMpact 5000R, Advanced Information, Page: 108 / 1388

Share
Download
Auerswald COMpact 5000R Advanced Information Download Page 108

GSM Gateway

COMpact 5000/R - Firmware V7.4A - Advanced Information V13 06/2019

- 108 -

GSM Gateway

A GSM gateway can be connected to an external port on the PBX. This

allows direct access to be configured on the world-wide GSM network

(Global System for Mobile Communications).

Note:

 GSM gateways take external calls automatically. When this is

done, costs may be charged to the caller, even if nobody takes the call on
the internal destination side.

Note:

 LCR ist not available for an external port connected to a GSM

gateway.

Note:

 If the PBX has no connection to the fixed network, outgoing

external calls can only be initiated via a targeted exchange line access
using the phone numbers (and the corresponding configured access)
entered on the page 

Routage > VoIP/GSM routing > Numéros de

téléphone d’exception

 or via a configured preferred exchange line

(

Exchange line settings

 for subscribers or groups).

Proceed as follows for configuration:

• Switching GSM at the external connection on and entering the freely

selectable phone number.
- Using the Configuration Manager (on the following pages)
-

Réseaux publics > RNIS > Liasion Point-Multi-Point (PMP)

-

Réseaux publics > RNIS > Numéro Principal d’abonnement/

Faisceau (NDI) > Configurer

Summary of Contents for COMpact 5000R













































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































Reviews:

No comments