Auerswald COMpact 5000R, Advanced Information, Page: 789 / 1388

Settings
COMpact 5000/R - Firmware V7.4A - Advanced Information V13 06/2019
- 789 -
Signalling by tones
Tonalité interne
Specifies which tone the user hears after picking up the receiver or after
pressing the flash or query key if a line is available. It is then possible to
dial a phone number.
Note: See Tones for information about sound sequences.
Busy tone at end of call
The PBX generates a busy signal at the end of the call (e. g. the
communication partner hangs up).
For some answering machines, this busy signal does not interrupt a
recording. These answering machines cannot differentiate between the
busy signal and speech. For such cases, the busy signal can be disabled.
Note: See Tones for information about sound sequences.
Tonalité spéciale si transf., Ne pas déranger, appel bébé
The PBX generates a special dial tone to bring attention to a configured
function (do-not-disturb, baby call (connection without dialling)).
Note: See Tones for information about sound sequences.
Tonalité spéciale si mémoire de données d’appels pleine
the PBX generates a special dial tone to bring attention that call data
memory has reached capacity.