Auerswald COMpact 5000R Advanced Information Download Page 63

Page: 63 / 1388

Busy-on-Busy

COMpact 5000/R - Firmware V7.4A - Advanced Information V13 06/2019

- 63 -

Busy-on-Busy

Busy-on-Busy limits the calls to a group. The caller then hears the busy

tone.
A maximum number of connection can be configured from which the

group members can no longer be reached. Call forwardings (CFU) and

multi-path call forwardings are still possible.
The maximum number of connections can also be configured dynamically.

This ensures that the number of maximum connections is automatically

adjusted to the number of registered group members so that the call is not

put on hold.

Proceed as follows for configuration:

• Assigning a maximum number of connections to a group or switching

Busy-on-Busy off.
- Using the Configuration Manager (page

Groupes > Propriétés >

Disponibilité > Busy-on-Busy

)

Summary of Contents for COMpact 5000R













































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































Search results

Summary of Contents for COMpact 5000R

Reviews:

Related manuals for COMpact 5000R

Brands by name

Popular brands

Auerswald COMpact 5000R, Advanced Information

Search results

Summary of Contents for COMpact 5000R

Reviews:

Related manuals for COMpact 5000R

Brands by name

Popular brands