Auerswald COMpact 5000R Advanced Information Download

Page: 124 / 1388

Explanations of the Ringing Sequence

COMpact 5000/R - Firmware V7.4A - Advanced Information V13 06/2019

- 124 -

Explanations of the Ringing Sequence

Different ringing sequences can be set, as it does not always make sense

that all phones logged in a group (e. g. in hotline mode) ring at the same

time.
The following ringing sequences are possible:

Tous

• All subscribers logged into the group ring

simultaneously (except fixed phones)

• Call waiting is applied to all logged-in phones when

they are busy

• The call is ended by the network provider (after

approx. 2 minutes)

• In the case of call forwarding on no reply, the group

call is forwarded to the destination already after the
configured delay time

linéaire

• All phones logged into a group ring directly one after

the other

• Only one phone rings at a time
• Busy subscribers are skipped
• In the case of call forwarding on no reply, the group

call is forwarded to the destination already after the
configured delay time

Adding

• All subscribers logged into a group ring one after the

other delayed by the specified time

• Busy subscribers are skipped

Summary of Contents for COMpact 5000R













































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































Search results

Summary of Contents for COMpact 5000R

Reviews:

Related manuals for COMpact 5000R

Brands by name

Popular brands

Auerswald COMpact 5000R, Advanced Information

Search results

Summary of Contents for COMpact 5000R

Reviews:

Related manuals for COMpact 5000R

Brands by name

Popular brands