VoIP/GSM Routing
COMpact 5000/R - Firmware V7.4A - Advanced Information V13 06/2019
- 266 -
VoIP/GSM Routing
VoIP/GSM routing precedes Least Cost Routing (LCR) and can be used
to specify an order for exchange line assignment to certain prefixes
or complete phone numbers. The LCR provider will then be dialled in
advance at the selected exchange lines (except for GSM gateways). A
table with exception numbers must be set up for this and saved in the
PBX.
VoIP/GSM routing proceeds as follows:
• A user dials an external number.
• The PBX checks whether the phone number or the phone number
range is specified in the exception numbers and switched on for the
current configuration.
• If the phone number is found, the PBX automatically forwards the dial
attempt to the first selected connection.
• If the selected connection is busy when dialled, the next connection
selected is attempted (up to three are possible).
• After a dial attempt with the third connection, if no connection is
established, you hear the busy signal.
Note:
If a call is initiated over a targeted exchange line access point or
VoIP access point, VoIP/GSM routing is not performed.
Note:
The VoIP/GSM routing is performed depending on the
destination number, if the exchange line settings (subscriber, group)
do not prevent this (e.g. exchange line authorisation only for selected
connections, preferred exchange line, call restrictor).
Summary of Contents for COMpact 5000R
Page 1: ...V13 06 2019 COMpact 5000 R Advanced Information ...
Page 224: ...Tones COMpact 5000 R Firmware V7 4A Advanced Information V13 06 2019 224 ...
Page 1278: ...B COMpact 5000 R Firmware V7 4A Advanced Information V13 06 2019 1278 B B Channel B Channel ...
Page 1385: ...W COMpact 5000 R Firmware V7 4A Advanced Information V13 06 2019 1385 W WAN WAN ...