Auerswald COMpact 5000R Advanced Information Download Page 629

Page: 629 / 1388

SIP

COMpact 5000/R - Firmware V7.4A - Advanced Information V13 06/2019

- 629 -

Résolution de nom via la configuration IP

There are several accounts at this domain and the name resolution for

another account at this domain has alreday been configured.

Note:

It is possible to set the name resolution differently for the

accounts of the same domain.

Via l’accès Internet utilisé

The name resolution takes place via the selected IAD under

Accès

Internet utilisé

. The DNS server provided by the provider is used.

Utiliser son propre DNS (via le dispositif d’accès intégré)

The DNS servers that are entered below are used via the selected IAD

under

Accès Internet utilisé

First DNS server

Deuxième serveur DNS

IPv4: 4 blocks with 3 digits separated by a dot (.).
IPv6: 8 blocks with 4 digits or letters separated by a colon (:).

Note:

If an IPv6 address is entered as DNS server, then the IAD

selected under

Accès Internet utilisé

must also have an IPv6 address.

Registre Port

SIP registrar, registry, SIP server, SIP registry server). Enter this data as

an IP address or a URL.

Note:

The page

Synthèses > Ports

shows an overview of the PBX

ports (incoming and outgoing).

Summary of Contents for COMpact 5000R













































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































Search results

Summary of Contents for COMpact 5000R

Reviews:

Auerswald COMpact 5000R, Advanced Information, Page: 629 / 1388

Search results

Summary of Contents for COMpact 5000R

Reviews: