Call Forwarding
COMpact 5000/R - Firmware V7.4A - Advanced Information V13 06/2019
- 672 -
When an external phone number is forwarded, the call can be forwarded
via a call channel on any of the other ports.
Note:
A call can only be redirected via a call channel on the same port.
The probability that the call cannot be forwarded because the channels
are busy is therefore higher.
Renouveler le transfert d’appel en cas de redémarrage du système
When rebooting the PBX, the saved data of the call forwarding is
renewed.
Important:
In Switzerland, the configuration of a call forwarding is
chargeable. To avoid costs, the check box must be disabled.
Delay time for Call Forwarding on no reply in the PBX
This delay time for external numbers specifies the time (in seconds) after
which a call is forwarded if the called subscriber does not respond.
Note:
The waiting time applies only to call forwarding that was set up
using the PBX. If the network provider has configured the call forwarding
function, the waiting time depends on their settings and cannot be
configured in the PBX.
Routing via exception numbers (VoIP + GSM)
Requirements:
• Configured exception numbers (page
Routage > Routage VoIP/GSM
> Numéros de téléphone d’exception
)
• Enabled call forwarding method
2. B channel
The device checks whether the destination number involved in call
forwarding for external numbers has been set up as an exception number.
If so, the call is sent along the configured path. If the destination number
Summary of Contents for COMpact 5000R
Page 1: ...V13 06 2019 COMpact 5000 R Advanced Information ...
Page 224: ...Tones COMpact 5000 R Firmware V7 4A Advanced Information V13 06 2019 224 ...
Page 1278: ...B COMpact 5000 R Firmware V7 4A Advanced Information V13 06 2019 1278 B B Channel B Channel ...
Page 1385: ...W COMpact 5000 R Firmware V7 4A Advanced Information V13 06 2019 1385 W WAN WAN ...