Auerswald COMpact 5000R Advanced Information Download Page 259

Page: 259 / 1388

Configuring External Internet Telephony

COMpact 5000/R - Firmware V7.4A - Advanced Information V13 06/2019

- 259 -

Configuring External Internet Telephony

Requirements:
• External VoIP channel (optoptional, see Technical Data in the

Instructions)

• An account with a VoIP provider
• Configured internal subscribers

Configure the PBX as follows:

1. Configure at least one VoIP channel as an external VoIP channel.

2. Make sure you have current VoIP provider data:

• Check previously configured provider data.
• Download and import provider data from the Internet.
• Enter provider data manually.

3. Configure the DNS server.

4. Create at least one VoIP account in the PBX and enter the account

and access data.

5. Enter your own VoIP phone numbers.

6. Set up call distribution (for incoming calls).

7. If necessary, enable DiffServ in order to increase VoIP call quality.

8. Check whether the registration of the VoIP account was successful

(Surveillance > Statut comptes VoIP).

Summary of Contents for COMpact 5000R













































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































Search results

Summary of Contents for COMpact 5000R

Reviews:

Related manuals for COMpact 5000R

Brands by name

Popular brands

Auerswald COMpact 5000R, Advanced Information

Search results

Summary of Contents for COMpact 5000R

Reviews:

Related manuals for COMpact 5000R

Brands by name

Popular brands