manualshive.com logo in svg

Auerswald COMpact 5000R, Advanced Information, Page: 181 / 1388

Share
Download
Auerswald COMpact 5000R Advanced Information Download Page 181

Provisioning Files

COMpact 5000/R - Firmware V7.4A - Advanced Information V13 06/2019

- 181 -

different file name and afterwards be edited. Saved under a different file

name, it is a provisioning file.

Header Files

Header files do not contain configuration data but refer to one or more

provisioning files which contain configuration data. Header files contain

a list of URLs which are processed in order.Provisioning files can neither

be provided by the PBX or by an external server. A combination of both

variants is permitted. The header file is the file that the phone must read

first. It can contain references to sub files. Any files can be imported,

however, Auerswald/FONtevo IP phones only support *.xml files.

You will find further information about header files in the 

Auerswald

Service Portal

 under 

Developer

).

Variables as placeholders

Variables for the parameters to be provisioned are created as

placeholders in the configuration files provided by the manufacturer.
Provisioning examines a file to be delivered to the phone. The identified

variable names are replaced by the values from the PBX configuration.

The changed file is then sent to the device to be provisioned.

Summary of Contents for COMpact 5000R













































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































Reviews:

No comments