Auerswald COMpact 5000R, Advanced Information

Page: 806 / 1388

Basic Settings
COMpact 5000/R - Firmware V7.4A - Advanced Information V13 06/2019
- 806 -
The call is handled almost similar to the ringing sequence
Tous
. The
only difference is the way multiple calls to the group are handled: If the
group receives further calls during an active call, the group will be split
into several smaller groups ringing for a specific active call. But there
will never ring more calls in the group than the number of free available
group members. Additional calls will be rejected with a busy then. If a call
is accepted the other phones ringing so far for this call are assigned to
the other pending calls and will immediately start to ring again. If a group
member finishes a call, this subscriber will immediately ring again for
the pending calls. The timer for the configured delay time (
après
) starts
after receiving the first call to the group and will not restart for additional
incoming calls.
Linéaire - fixe - groupe fractionné
Only the phone of one group member will ring. After the configured delay
time (
après
) another single group member will be called. The order of
calls depends on the configured
Priorité
. If a call was not accepted,
although all logged-in members of the group were called, the call would be
finished with a busy signal.
Linéaire - compensé - groupe fractionné
Only the phone of one group member will ring. After the configured delay
time (
après
) another single group member will be called. The order of the
calls depends on the configured
Priorité
: First of all the member of the
group first logged-in gets the position 1 in the order of calls, the second
one the position 2, ... . If position 1 takes a call, the second call will be
assigned to position 2. The member of the group with the position 1 will
get the last position in the order for a future call after he has finished the
current call. If a call was not accepted, although all logged-in members of
the group were called, the call would be finished with a busy signal.
Linéaire - fixe - rotatif - groupe fractionné
Only the phone of one group member will ring. After the configured delay
time (
après
) another single group member will be called. If all members
of a group are called, the process will be restarted with the first member