Auerswald COMpact 5000R Advanced Information Download

Page: 111 / 1388

Shutting Down and Switching Off

COMpact 5000/R - Firmware V7.4A - Advanced Information V13 06/2019

- 111 -

Shutting Down and Switching Off

If it is necessary to separate the PBX from the electric current (pull

the power plug of the PBX out of the socket and also of the accessory

equipment where required), the PBX will first have to be powered down

properly.
Proceed as follows for powering down and switching off the PBX:

Important:

When shutting down the PBX, all of the connections to the

web server, all calls and all data services are terminated. Unsaved data is
lost.

• Immediate powering down.

- Using the Configuration Manager (page

Administration > Mise à

jour et redémarrage du firmware

)

Note:

The PBX is powered down immediately. All connected calls will

be disconnected.

• Delayed powering down.

- Using the Configuration Manager (page

Administration > Mise à

jour et redémarrage du firmware

)

Note:

The PBX is powered down only after all calls are finished.

Summary of Contents for COMpact 5000R













































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































Search results

Summary of Contents for COMpact 5000R

Reviews:

Related manuals for COMpact 5000R

Brands by name

Popular brands

Auerswald COMpact 5000R, Advanced Information

Search results

Summary of Contents for COMpact 5000R

Reviews:

Related manuals for COMpact 5000R

Brands by name

Popular brands