manualshive.com logo in svg

Auerswald COMpact 5000R, Advanced Information, Page: 787 / 1388

Share
Download
Auerswald COMpact 5000R Advanced Information Download Page 787

Settings

COMpact 5000/R - Firmware V7.4A - Advanced Information V13 06/2019

- 787 -

• Differently configurable functions for private and business calls

activated
- Using the Configuration Manager (page 

Abonnés (Abo) > Tous

les abonnés

)

The subscriber is able to make private calls without entering a user PIN

but only on his own phone.

Note:

 When authorisation is granted for initiating personal calls without

a PIN, there is no protection against misuse by other internal users.

Flux RSS      Nombre de flux RSS installés
0

No RSS feeds will be provided.

1

For incoming messages (voice messages and faxes) and missed

calls RSS feeds will be provided. After querying the RSS feeds for the

subscriber, a new query can be made after 15 minutes, at the earliest.

2

 to 

...

For incoming messages (voice messages and faxes) and missed calls

RSS feeds will be provided. The RSS feed for the subscriber in the

selected number can be queried without the block time of approximately

15 minutes (e.g. at a PC and Notebook, if the RSS feed has been

subscribed for previously).

Important:

 A restart, e.g. after a power failure or a firmware update,

deletes the entries of the RSS feed in the PBX. Entries which have
already been queried may still exist in the newsreader/browser.

Summary of Contents for COMpact 5000R













































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































Reviews:

No comments