Auerswald COMpact 5000R, Advanced Information

Page: 200 / 1388

Call Forwarding for Groups
COMpact 5000/R - Firmware V7.4A - Advanced Information V13 06/2019
- 200 -
Call Forwarding for Groups
When call forwarding for groups is used, internal and external calls to a
group can be rerouted to other internal phones or external connections. In
this way, a person that is not a member of this group and therefore cannot
log in, can receive these calls.
Call forwarding for groups makes sure that someone is always available
on the group number, even if the calls cannot be taken by a member of the
group.
Note: LCR will be used for call forwarding for groups to an external
destination (e.g., mobile phone) if at least one member of the group has
LCR enabled. It does not matter if the corresponding subscriber is logged
in or not.
Note: When forwarding a group the option Comme les abonnés
in the exchange line settings of the group is not considered. For call
forwarding instead exchange line authorisation is not restricted and no call
restrictors and call deblockers are used.
Note: Preferred exchange line/Number Presentation: The number of
the group is always presented.
Note: To avoid having to use a second call channel in the case of
call forwarding to an external destination, the PBX tries to reroute the
call directly at the network provider using call deflection. The following
requirements must be fulfilled for this purpose: 1. The incoming call was
made via an ISDN network provider supporting call deflection. 2. The