Auerswald COMpact 5000R, Advanced Information

Page: 1171 / 1388

Reset of the PBX (Restart)
COMpact 5000/R - Firmware V7.4A - Advanced Information V13 06/2019
- 1171 -
Reset of the PBX (Restart)
Proceed as follows:
• Using the Configuration Manager (page
Administration >
Firmwareupdate/restart )
• To restore firmware, to restart and (only COMmander 6000/R/RX) to
power down the PBX: By clicking a button on the PBX
Redémarrage
Requirements:
• Configured timeframe until restart
The
Power LED remains lit in green until all of the calls are terminated
or until the end of the waiting time. If all calls, all connections to/from the
web server and all data services are terminated, the PBX will perform a
restart (even before the defined time has elapsed). If a call (a connection)
is active after the time has elapsed, this call will be interrupted to perform
the restart.
The
Power LED lights up/flashes in red and orange for up to two minutes.
If the Power LED lights up in green again, the restart is complete and the
PBX is ready for operation.
Note: If the Power LED remains continuously lit in red, an error has
occurred. Please contact your dealer or the manufacturer directly.
Minutes
Select a timeframe until restart or power down.