VoIP Settings
COMpact 5000/R - Firmware V7.4A - Advanced Information V13 06/2019
- 779 -
• Subscriber is a VoIP end device
Tampon de gigue
Specifies the size of the jitter buffer in milliseconds (duration of the audio
signals). In this time period RTP packets are cached (lower values = lower
number, greater values = greater number). Delays in the transmission and
loss of packets can be compensated that way.
Compensation de l’écho
The system compensates for local echoes and reverberation effects
during internal VoIP calls.
Chiffrement RTP
Allows an exception from the default settings of the PBX for the
corresponding VoIP subscriber. The default setting is
Adopt from
Administration - > SIPS/SRTP internal (default)
.
Applying the exception is required if:
• The corresponding phone does not support the settings of the PBX.
This may cause problems e.g., during a call being established.
• You must circumvent the settings of the PBX for test purposes or
trouble shooting.
Note:
The settings of the PBX for the corresponding subscriber and
the settings of the phone must match.
Adopt from Administration - > SIPS/SRTP internal (default)
The PBX setting applies for the subscriber.
Seulement chiffré
Summary of Contents for COMpact 5000R
Page 1: ...V13 06 2019 COMpact 5000 R Advanced Information ...
Page 224: ...Tones COMpact 5000 R Firmware V7 4A Advanced Information V13 06 2019 224 ...
Page 1278: ...B COMpact 5000 R Firmware V7 4A Advanced Information V13 06 2019 1278 B B Channel B Channel ...
Page 1385: ...W COMpact 5000 R Firmware V7 4A Advanced Information V13 06 2019 1385 W WAN WAN ...