Auerswald COMpact 5000R Advanced Information Download Page 510

Page: 510 / 1388

Statut comptes VoIP

COMpact 5000/R - Firmware V7.4A - Advanced Information V13 06/2019

- 510 -

Error, for example caused by:
• Registrar offline. Outgoing calls might be possible (STUN

request and outbound proxy successful). Incoming calls not
possbile (no phone number at the registrar of the provider).

• Faulty domian settings
• Faulty account data (check user name, password and

authentication ID)

• VoIP provider blocks multi registrations caused by multiple

restarts of the PBX in a too short time.

dernier appel sortant

INVITE request was answered by the VoIP provider

Note:

The logical status is displayed (e. g. an

INVITE request to the provider with the answer „404 Not
Found“ (unknown phone number) is considered as successful.

unclear, e. g. caused by:
• No call has been made via this account yet.
• Faulty STUN request. Current status must be checked

again.

Error, for example caused by:
• Outbound proxy offline
• Faulty outbound proxy settings
• Faulty domain settings

Summary of Contents for COMpact 5000R













































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































Search results

Summary of Contents for COMpact 5000R

Reviews:

Related manuals for COMpact 5000R

Brands by name

Popular brands

Auerswald COMpact 5000R, Advanced Information

Search results

Summary of Contents for COMpact 5000R

Reviews:

Related manuals for COMpact 5000R

Brands by name

Popular brands