Auerswald COMpact 5000R Advanced Information Download Page 694

Page: 694 / 1388

Call Distribution for

COMpact 5000/R - Firmware V7.4A - Advanced Information V13 06/2019

- 694 -

The call is immediately signaled at the internal number for the
fallback. It is, thus, signaled in parallel to the announcement before
answering.

Après l’annonce d’accueil

The call is signalled after the announcement before answering
to the internal number for fallback and, thus, in parallel to the call
phase.

Réversion après délai après

Requirements:
• Selected fallback number (see fallback)
All calls which have not been answered will be redirected after the

configured time.

Note:

The fallback time is the addition of the longest waiting time for

the Call Forwarding on no reply and the seconds configured in

après

. The

longest waiting time will be determined by a comparison of the

Delay time

for CF on no reply in the PBX

and the

Temps d’attente pour transf. si

non-réponse

Acheminement des appels linéaire (externe = interne)

Requirements:
• Configured connection type PTP connection
A 1:1 assignment for the extensions is made automatically for internal

numbers and external extensions that are matching the extensions block.

Summary of Contents for COMpact 5000R













































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































Search results

Summary of Contents for COMpact 5000R

Reviews:

Auerswald COMpact 5000R, Advanced Information, Page: 694 / 1388

Search results

Summary of Contents for COMpact 5000R

Reviews: