Auerswald COMpact 5000R Advanced Information Download Page 1040

Page: 1040 / 1388

Management Provider Online Name Search

COMpact 5000/R - Firmware V7.4A - Advanced Information V13 06/2019

- 1040 -

Management Provider Online Name Search

Proceed as follows:
• Using the Configuration Manager (page

Fonctions > Recherche de

nom en ligne > Paramètres de base

)

Note:

The service provider list accommodates up to five service

providers.

Recherche de nom en ligne

Requirements:
• A configured DNS server and, if necessary, an HTTP proxy server

- Using the Configuration Manager (page

Administration >

Configuration IP

)

• At least one online service provider must have been entered for the

online name search

The PBX attempts to obtain the missing name from the selected service

provider.

actif

Select the service provider to be used for the online name search. (Select

Nouveau

to enter.)

Configurer

Opens the configuration of the provider and the corresponding group

filters.

«
...
1038
1039
1040
1041
1042
...
»

Summary of Contents for COMpact 5000R













































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































Search results

Summary of Contents for COMpact 5000R

Reviews:

Auerswald COMpact 5000R, Advanced Information, Page: 1040 / 1388

Search results

Summary of Contents for COMpact 5000R

Reviews: