Auerswald COMpact 5000R Advanced Information Download Page 233

Page: 233 / 1388

Transferring a Caller of the Main PBX to Another Subscriber on the Main PBX from the Sub-
System PBX

COMpact 5000/R - Firmware V7.4A - Advanced Information V13 06/2019

- 233 -

Transferring a Caller of the Main PBX to Another
Subscriber on the Main PBX from the Sub-System
PBX

Requirements:
• Two free external VoIP channels for the subordinate PBX
• Authorisation

Transfert d’appels externes vers l’extérieur

assigned

to the subscriber of the subordinate PBX (page

Abonnés (Abo) >

Propriétés > Droits

)

Note:

Set the maximum duration of the transferred call (page

Abonnés (Abo) > Tous les abonnés

) to limit the time the two external

VoIP channels are occupied.

1. Initiate a query call to the other subscriber on the main PBX.

2. Hang up the receiver while the other phone is still ringing (blind

transfer) or during the query call.
Both communication partners are connected to each other.

Summary of Contents for COMpact 5000R













































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































Search results

Summary of Contents for COMpact 5000R

Reviews:

Auerswald COMpact 5000R, Advanced Information, Page: 233 / 1388

Search results

Summary of Contents for COMpact 5000R

Reviews: