Configuring the PBX Remotely via the Internet (without (Auerswald) Remote Access Server)
COMpact 5000/R - Firmware V7.4A - Advanced Information V13 06/2019
- 78 -
Configuring the PBX Remotely via the Internet
(without (Auerswald) Remote Access Server)
Requirements:
• Internet connection between the computer and the PBX (for example,
DSL)
• Permanent external IP address, or the use of VPN or DynDNS
• A router configured for this purpose
• Knowledge of user name and password for the Configuration Manager
• Knowledge of the configured port of the web server
Note:
Refer to the operating manual of your router.
Note:
The access is possible via
http:
and via
https:
(encrypted
access). If the option
Forcer la connexion HTTPS
has been enabled,
only the https connection can be used. In this case, a port you selected
yourself must be rerouted to port 443 of the PBX (access with
https://
mein.dyndns.org:[Port]
, for example.
Important:
An internal network is usually protected from actions
from the outside by, for example, a firewall integrated in the router. For
questions about configuring your firewall, contact the system administrator
responsible for this topic.
1. Start a browser (for example, Mozilla Firefox).
2. Enter https:// and the external IP address for the PBX as well as the :
character, and then the port, into the address field of the browser.
Summary of Contents for COMpact 5000R
Page 1: ...V13 06 2019 COMpact 5000 R Advanced Information ...
Page 224: ...Tones COMpact 5000 R Firmware V7 4A Advanced Information V13 06 2019 224 ...
Page 1278: ...B COMpact 5000 R Firmware V7 4A Advanced Information V13 06 2019 1278 B B Channel B Channel ...
Page 1385: ...W COMpact 5000 R Firmware V7 4A Advanced Information V13 06 2019 1385 W WAN WAN ...