![background image](http://html1.mh-extra.com/html/telesynergy/abovedge-mv-6432/abovedge-mv-6432_quick-installation-manual_1082273001.webp)
Quick Installation Guide
Table of Content
Startup and Shut down ........................................................................................................ 1
IP Network connection ....................................................................................................... 1
Connect power cord and power on the AbovEdge SS-7010/MV6432 ............................... 6
Connect power cord and power on the Extension Expansion Module ES-0624/0030 ....... 7
Log in the AbovEdge Administrator Interface through Host PC ....................................... 8
Startup and Shut down
Plug power cord into the AbovEdge SS-7010/MV-6432, the system will power up and
start running.
When shut down the system, press and hold the red power switch for
one
seconds
for AbovEdge SS-7010/MV-6432 to do a “soft” shutdown. Do not
hold more than 4 seconds, which will result in a “forced shutdown” of the
system.
IP Network connection
Connect AbovEdge SS-7010/MV-6432’s WAN port to a network Switch. Do NOT
connect to the LAN port. LAN port is for TeleSynergy’s internal usage only. Wait for
AbovEdge finish startup, you can configure AbovEdge through HOST PC by default IP
address.