Auerswald COMpact 5000R, Advanced Information

Page: 708 / 1388

Management Subscriber
COMpact 5000/R - Firmware V7.4A - Advanced Information V13 06/2019
- 708 -
Note: The device type Combiné pour COMfortel IP1040 needs
exactly eight characters (digits and/or characters - no special characters!).
Note: The device type Combiné pour COMfortel WS-IP needs up to
32 characters (digits and/or characters - no special characters!).
Affecter l’adresse MAC du périphérique
The MAC address of a phone is needed to identify a phone that is
assigned to a specific subscriber. For all transactions between phone and
PBX the PBX must be able to identify the MAC address of the phone so
that the phone can be matched to a subscriber and his/her provisioning
data.
Périphériques trouvés
Select one of the existing MAC adresses.
Périphériques affectés
MAC adresses already assigned to the subscribers.
manual assignement
Enter manually (only digits) or take over a MAC adress after reading with
a bar code scanner.
The MAC address of a device can be found as follows:
• Retrieving from a client certificate sended by the phone
• Reading with a bar code scanner enabled and connected to the
computer (e. g. via a USB interface)
• Reading e. g. on the menu oft the phone or on a label