Auerswald COMpact 5000R Advanced Information Download

Page: 472 / 1388

Acheminement des appels

COMpact 5000/R - Firmware V7.4A - Advanced Information V13 06/2019

- 472 -

The caller will be transferred to the internal number similar to the DDI. If

this phone number is not configured in the PBX, the fallback function will

be used.

Rejeter l’appel

The caller hears the busy signal.
Internal number: The caller will be transferred to the selected internal

number (subscriber, group, voice mail/fax box or automatic reception).

Note:

External numbers, e.g., those used as remote switching/

programming numbers or call through numbers, may not be used in the
call distribution.

...Analogue

No de téléphone interne | Nom

Internal number: The caller will be transferred to the selected internal

number (subscriber, group, voice mail/fax box or automatic reception).

Summary of Contents for COMpact 5000R













































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































Search results

Summary of Contents for COMpact 5000R

Reviews:

Related manuals for COMpact 5000R

Brands by name

Popular brands

Auerswald COMpact 5000R, Advanced Information

Search results

Summary of Contents for COMpact 5000R

Reviews:

Related manuals for COMpact 5000R

Brands by name

Popular brands