manualshive.com logo in svg

Auerswald COMpact 5000R, Advanced Information, Page: 1011 / 1388

Share
Download
Auerswald COMpact 5000R Advanced Information Download Page 1011

Management Macro Short-Code Number

COMpact 5000/R - Firmware V7.4A - Advanced Information V13 06/2019

- 1011 -

•

C

 Waiting for connection

Note:

 If the macro does not end with an 

H

 and the macro dialler is

after the execution of a macro in an active connection, the call will be
connected to the subscriber who triggered it.

Macros de numérotation abrégée

Note:

 A short-code number must not begin with 

0

 or the exchange line

access number.

For example: the internal number 60 for the pick-up sequence ##06.

Nom de la macro

For example: Pick-up

Macro sequence

Digit sequence (e. g. ##06) or sequence of macro commands that are

selected or triggered by the short-code.

 Nouveau

 Supprimer

 Documents imprimés

Prints a list of all configured short-code macros.

Summary of Contents for COMpact 5000R













































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































Reviews:

No comments