Auerswald COMpact 5000R Advanced Information Download

Page: 238 / 1388

Management Voice Mail/Fax Function and Memory

COMpact 5000/R - Firmware V7.4A - Advanced Information V13 06/2019

- 238 -

Management Voice Mail/Fax Function and Memory

Announcements for the voice mailboxes, language files, incoming faxes

and voice messages are stored on the required USB data storage device.

Caution:

Do not remove the USB data storage device while the

system is running.

• Switch off the PBX before removing the USB data storage device.

Note:

A directory structure is created on the USB data storage device.

You should not change this structure.

Note:

The USB data storage device must have at least 50 MB free

memory.

Summary of Contents for COMpact 5000R













































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































Search results

Summary of Contents for COMpact 5000R

Reviews:

Related manuals for COMpact 5000R

Brands by name

Popular brands

Auerswald COMpact 5000R, Advanced Information

Search results

Summary of Contents for COMpact 5000R

Reviews:

Related manuals for COMpact 5000R

Brands by name

Popular brands