Auerswald COMpact 5000R Advanced Information Download

Page: 168 / 1388

Pick-up and Call Take-over

COMpact 5000/R - Firmware V7.4A - Advanced Information V13 06/2019

- 168 -

Pick-up and Call Take-over

Using Pick-up, you can take a call on your own phone that was originally

sent to another internal phone.
If the call has already been taken, the call can be taken using same

procedure if the call take-over has been allowed by the subscriber being

called. This function is useful, for example, in the case of answering

machines.

Proceed as follows for configuration:

• Switching authorisation for pick-up for the involved internal phones on.

- Using the Configuration Manager (page

Abonnés (Abo) >

Propriétés > Droits

)

• Switching call take-over for the involved internal phones on.

- Using the Configuration Manager (page

Abonnés (Abo) >

Propriétés > Paramètres

)

Summary of Contents for COMpact 5000R













































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































Search results

Summary of Contents for COMpact 5000R

Reviews:

Related manuals for COMpact 5000R

Brands by name

Popular brands

Auerswald COMpact 5000R, Advanced Information

Search results

Summary of Contents for COMpact 5000R

Reviews:

Related manuals for COMpact 5000R

Brands by name

Popular brands