Auerswald COMpact 5000R, Advanced Information, Page: 634 / 1388

SIP
COMpact 5000/R - Firmware V7.4A - Advanced Information V13 06/2019
- 634 -
are then sent as a block. Time measurement restarts after the entry of
each digit. After the selected time has passed, the PBX recognises the
most recent digit as the final digit and will not allow any more numbers to
be entered.
Note: En-bloc dialling is a good idea, for example, when dialling single
digits causes problems in sub-system operation.
Note: Select as short a time as possible, because the PBX does not
forward the entire phone number to the public exchange until the specified
time has passed.
Note: Approximately three seconds is the default value for manual
inputs.
SIPS Structure URL
Requirements:
• External VoIP channel that supports SIPS (optional, see Technical
Data in the Instructions)
• A certificate for the VoIP provider stored in the PBX
This provider encrypts external connections to prevent listening in. The
processes used to set up and shut down a connection, and signalling, are
all encrypted by SIPS.
SIPS
Encryption of SIPS via TLS.
SIP/TLS
Encryption of SIP via TLS.