Allice Messtechnik R&S ZND, User Manual, Page: 978 / 1252

Command reference
R&S
®
ZND
978 User Manual 1173.9557.02 ─ 61
Setting parameters:
<Activate> ONCE
Applies the auto length function.
Example: *RST; :CORR:EDEL:AUTO ONCE
Reset the instrument and apply the auto length function to the
default trace (Trc1 in channel 1).
Usage: Setting only
Manual operation: See "Auto Length" on page 461
[SENSe<Ch>:]CORRection:EDELay<PhyPt>:DIELectric <Permittivity>
Defines the permittivity for the offset correction at test port
<PhyPt>
.
Suffix:
<Ch>
.
Channel number of the offset-corrected channel
<PhyPt> Port number of the analyzer
Parameters:
<Permittivity> Permittivity
Range:
1 to +1E+6
*RST: 1.00062
Example: See
[SENSe<Ch>:]CORRection:EDELay<PhyPt>:ELENgth
Manual operation: See "Permittivity / Velocity Factor" on page 460
[SENSe<Ch>:]CORRection:EDELay<PhyPt>:DISTance <MechLength>
Defines the offset parameter for test port
<PhyPt>
as a mechanical length.
Suffix:
<Ch>
.
Channel number of the offset-corrected channel
<PhyPt> Port number of the analyzer
Parameters:
<MechLength> Mechanical length
Range:
-3.402038 m to +3.4028038 m.
*RST: 0 m
Default unit: m
Example: See
[SENSe<Ch>:]CORRection:EDELay<PhyPt>:ELENgth
Manual operation: See "Delay / Electrical Length / Mech. Length" on page 460
[SENSe<Ch>:]CORRection:EDELay<PhyPt>:ELENgth <ElecLength>
Defines the offset parameter for test port
<PhyPt>
as an electrical length.
SCPI command reference
www.allice.de Allice Messtechnik GmbH