Allice Messtechnik R&S ZND, User Manual, Page: 335 / 1252

GUI reference
R&S
®
ZND
335 User Manual 1173.9557.02 ─ 61
5.7 Marker softtool
The "Marker" softtool allows you to position markers on a trace and to define their
properties. Markers are also convenient tools for searching special points on traces
and for scaling diagrams.
Access: TRACE – [MARKER]
Background information
Refer to the following sections:
●
Chapter 4.2.1.3, "Markers" , on page 89
●
Chapter 3.3.6.6, "Set by marker" , on page 63
5.7.1 Markers tab
Creates markers and configures their properties. Markers are available for all trace for-
mats.
A first marker labeled "M1" is automatically created when the [MARKER] hardkey is
pressed. The "Mkr 1" ... "Mkr 10" and "Ref Mkr" softkeys enable the corresponding
markers.
"Add Marker" adds a new marker.
Related information
Refer to the following sections:
●
Chapter 4.2.1.3, "Markers" , on page 89
●
Chapter 3.3.4, "Handling diagrams, traces, and markers" , on page 52
Marker softtool
www.allice.de Allice Messtechnik GmbH