manualshive.com logo in svg

Allice Messtechnik R&S ZND, User Manual, Page: 472 / 1252

Share
Download
Allice Messtechnik R&S ZND User Manual Download Page 472

GUI reference

R&S

®

ZND

472

User Manual 1173.9557.02 ─ 61

Output Settings

Allows you to specify the directory where the fixture modeling tools store their data.

Default is 

C:\Users\Public\Documents\Rohde-Schwarz\Vna\Embedding

.

If "Timestamp Filenames" is checked, the names of subsequently generated "Test Cou-
pon" and "DUT + Test Fixture" files are prefixed with the current date and time.

Remote command: 

CALCulate:FMODel:DIRectory
CALCulate:FMODel:DIRectory:DEFault
CALCulate:FMODel:DIRectory:DEFault:CLEar
CALCulate:FMODel:REName

Advanced Settings ...

Opens the "Advanced Settings" dialog of the selected tool. See:

●

Chapter 5.13.5.6, "ISD Advanced Settings"

, 

on page 478

●

Chapter 5.13.5.7, "SFD Advanced Settings"

, 

on page 481

●

Chapter 5.13.5.8, "EZD Advanced Settings"

, 

on page 482

Use Impedance Correction

Enables/disables the impedance correction functionality of the respective tool.

This is a global setting.

Remote command: 

CALCulate:FMODel:EZD:IMPedance
CALCulate:FMODel:ISD:IMPedance
CALCulate:FMODel:SFD:IMPedance

(

CALCulate:FMODel:SFD:AUTO

)

Suppress Remeasure Warnings

If checked, the 

Measure Coupon

 and 

Measure DUT + Test Fixture

 do not raise warn-

ings, if the measurement is repeated with different ports.

This is a global setting.

Remote command: 
n.a.

Reset to Default

Restores the default settings of the selected fixture modeling tool. This comprises:

●

The states and settings in the 

Measure Coupon

, 

Measure DUT + Test Fixture

 and

Save Fixture Model

 sections (common for all tools)

●

The global settings of the selected tool (tool specific)

Remote command: 

CALCulate:FMODel:ISD:PRESet
CALCulate:FMODel:SFD:PRESet
CALCulate:FMODel:EZD:PRESet

Apply

This button is only active, if the selected deembedding tool has been successfully run
(see 

Chapter 5.13.5.4, "Save Fixture Model"

, 

on page 475).

Offset Embed softtool

www.allice.de

Allice Messtechnik GmbH

Summary of Contents for R&S ZND





































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































Reviews:

No comments