Allice Messtechnik R&S ZND, User Manual, Page: 471 / 1252

GUI reference
R&S
®
ZND
471 User Manual 1173.9557.02 ─ 61
Figure 5-28: Fixture modeling dialog: EZD - Single Ended Ports
The fixture modeling proceeds in the following steps:
1. Measure one or more test coupons for the related fixture; see Chapter 5.13.5.2,
"Measure Coupon" , on page 473
The tools differ in the available coupon types.
2. Measure the DUT with the fixture; see Chapter 5.13.5.3, "Measure DUT + Test Fix-
ture" , on page 474
3. Run the selected tool to calculate the Touchstone files modeling the test fixture;
see Chapter 5.13.5.4, "Save Fixture Model" , on page 475.
The calculated
sNp
file(s) can then be used to deembed the DUT at selected
port(s).
All files generated by actions in this dialog are stored in the directory C:\Users\Public
\Documents\Rohde-Schwarz\Vna\Embedding.
The current implementation assumes symmetrical lead-ins and lead-outs.
5.13.5.1 Common controls on the dialog
The following controls are located at the bottom of each dialog (ISD/SFD/EZD, single-
ended/balanced):
Offset Embed softtool
www.allice.de Allice Messtechnik GmbH