Allice Messtechnik R&S ZND, User Manual, Page: 965 / 1252

Command reference
R&S
®
ZND
965 User Manual 1173.9557.02 ─ 61
Example: Suppose that the cal pool contains a file
'Calgroup3.cal'
with a valid through calibration for the active channel no. 1,
which you want to include in a new TOSM calibration for ports 1
and 2.
MMEM:CDIR DEF; CDIR 'Calibration\Data'
Go to the cal group directory.
:SENSe1:CORRection:COLLect:METHod:DEFine 'New
Cal', TOSM, 1, 2
Define a new TOSM calibration.
SENSe1:CORRection:COLLect:LOAD:SELected 'Cal
Group 3.cal', THROUGH, 1, 2
Load the through data from the cal pool file into the new calibra-
tion.
SENSe1:CORRection:COLLect:ACQuire:SELected
OPEN, 1
Proceed with the new calibration measurements.
Manual operation: See "Start Cal Sweep" on page 404
[SENSe<Ch>:]CORRection:COLLect:METHod:DEFine <CalName>, <CalType>,
<TestPort1>[, <TestPort2>[, <TestPort3orAdapterCalKit>[, <TestPorts>]...]]
Defines the calibration to be performed for channel
<Ch>
.
If multiple channels shall be calibrated in parallel, use
●
[SENSe:]CORRection:COLLect:CHANnels:ALL
ON or
●
[SENSe:]CORRection:COLLect:CHANnels:MCTYpes
ON
before executing this command. For background information see Chapter 4.5.7, "Paral-
lel calibration of multiple channels" , on page 181.
Calibration data is acquired using
[SENSe<Ch>:]CORRection:COLLect[:
ACQuire]:SELected
.
Suffix:
<Ch>
.
Channel number
Parameters:
<CalName> Name of the calibration (string parameter). The name serves as
a reference to delete a particular set of system correction data
(
[SENSe<Ch>:]CORRection:COLLect:DELete
).
<CalType> ARTosm | REFL | RSHort | FOPort | FRTRans | FTRans |
RTRans | OPTPort | TOSM | TOM | TSM | TRM | TRL | TNA |
UOSM
Calibration types; see list below.
SCPI command reference
www.allice.de Allice Messtechnik GmbH