manualshive.com logo in svg

Allice Messtechnik R&S ZND, User Manual, Page: 1062 / 1252

Share
Download
Allice Messtechnik R&S ZND User Manual Download Page 1062

Command reference

R&S

®

ZND

1062

User Manual 1173.9557.02 ─ 61

Parameters:

<Boolean>

ON | OFF

Manual operation: 

See 

"Deembed Two-Port (All Channels)"

 

on page 574

SYSTem:COMMunicate:RDEVice:SMATrix<Matr>:CATalog?

Queries the numbers of the switch matrices currently part of the RF configuration (see

INSTrument:SMATrix

 

on page 866). The response is a string containing a comma-

separated list of switch matrix numbers.

Suffix: 

<Matr>

.

This suffix is ignored and can be omitted.

Example: 

Suppose switch matrices 1 and 2 are currently connected to the
R&S

 

ZND.

SYST:COMM:RDEV:SMAT1:CAT?

Query the numbers of the connected switch matrices. The
response is '1, 2'.

SYST:COMM:RDEV:SMAT1:COUN?

Query the number of connected switch matrices. The response
is 2.

Usage: 

Query only

SYSTem:COMMunicate:RDEVice:SMATrix:CONFigure:ABORt

Aborts a manual RF connection configuration.

Note: 

a manual RF connection configuration must be performed within a transaction,

enclosed by the commands 

SYSTem:COMMunicate:RDEVice:SMATrix:

CONFigure:STARt

 and 

SYSTem:COMMunicate:RDEVice:SMATrix:CONFigure:

END

. The modified configuration will not be applied until the end of this transaction.

The new configuration is discarded, i.e. the previous configuration remains active ("roll-
back"). The transaction wil be terminated.

Usage: 

Event

SYSTem:COMMunicate:RDEVice:SMATrix:CONFigure:END

Ends a manual RF connection configuration: if the configuration is valid, it will be acti-
vated ("commit"). Otherwise an error is returned and the new configuration is discar-
ded, i.e. the previous configuration remains active ("rollback").

In any case the transaction will be terminated.

Note: 

a manual RF connection configuration must be performed within a transaction,

enclosed by the commands 

SYSTem:COMMunicate:RDEVice:SMATrix:

CONFigure:STARt

 and 

SYSTem:COMMunicate:RDEVice:SMATrix:CONFigure:

END

. The modified configuration will not be applied until the end of this transaction.

SCPI command reference

www.allice.de

Allice Messtechnik GmbH

Summary of Contents for R&S ZND





































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































Reviews:

No comments