Command reference
R&S
®
ZND
716
User Manual 1173.9557.02 ─ 61
CALCulate<Chn>:MATH:STATe
<Boolean>
CALCulate<Chn>:MATH:FORMatted:STATe
<Boolean>
Activates or deactivates trace math for unformatted and/or formatted trace data, i.e. the
trace formulae defined via
CALCulate<Chn>:MATH[:EXPRession]:SDEFine
and/or
CALCulate<Chn>:MATH:FORMatted[:EXPRession]:SDEFine
tively.
When trace math is active either for unformatted or formatted data, the resulting math-
ematical trace is calculated and displayed instead of the active data trace.
Suffix:
<Chn>
.
Channel number used to identify the active trace
Parameters:
<Boolean>
ON
–
apply trace math on the
OFF
–
display the active data trace
*RST:
OFF
Example:
*RST; :CALC:MATH:MEM
Copy the current state of the default trace
'Trc1'
to a memory
trace named
'Mem2[Trc1]'
. The memory trace is not dis-
played.
CALC:MATH:SDEF 'Trc1 / Mem2[Trc1]'
Define a mathematical trace, dividing the complex data trace by
the stored complex memory trace. The mathematical trace is not
displayed.
CALC:MATH:STAT ON
Display the mathematical trace instead of the active data trace.
Manual operation:
CALCulate<Chn>:MATH:WUNit[:STATe]
<Boolean>
Controls the conversion and formatting of the mathematic expression defined via
CALCulate<Chn>:MATH[:EXPRession]:SDEFine
Suffix:
<Chn>
.
Channel number used to identify the active trace
Parameters:
<Boolean>
ON
–
"Result is Wave Quantity" enabled: the analyzer assumes
that the result of the mathematical expression represents a volt-
age.
OFF
–
"Result is Wave Quantity" disabled: the analyzer assumes
that the result of the mathematical expression is dimensionless.
*RST:
OFF
SCPI command reference
www.allice.de
Allice Messtechnik GmbH