Allice Messtechnik R&S ZND, User Manual, Page: 459 / 1252

GUI reference
R&S
®
ZND
459 User Manual 1173.9557.02 ─ 61
5.13.2 Offset tab
Defines length offset parameters for each port.
Use the complementary dock widget to activate or deactivate length/loss compensation
for selected ports (see
Chapter 5.13.1.2, "Offset panel" , on page 450).
The marker function Zero Delay at Marker function overwrites the offset parameters.
Background information
Refer to the following sections.
●
Chapter 4.6, "Offset parameters and de-/embedding" , on page 182
●
Chapter 4.6.1.1, "Definition of offset parameters" , on page 182
●
Chapter 4.6.1.3, "Auto Length" , on page 183
●
Chapter 4.6.1.6, "Application and effect of offset parameters" , on page 187
●
Chapter 4.6.1.7, "Offset parameters for balanced ports" , on page 187
●
Chapter 4.6.1.5, "Fixture Compensation" , on page 186
5.13.2.1 Controls on the Offset tab
Overview
This button is available on all "Offset Embed" softtool tabs. It opens the Overview panel
in the Offset Embed dock widget .
Offset Embed softtool
www.allice.de Allice Messtechnik GmbH