Allice Messtechnik R&S ZND, User Manual, Page: 834 / 1252

Command reference
R&S
®
ZND
834 User Manual 1173.9557.02 ─ 61
Suffix:
<DispEl>
.
Number of the display element as described in the table below.
Parameters:
<Red> Red content of the defined color.
Range:
0 (zero intensity, corresponding to a 0 in the 24-bit
color model) to 1 (full intensity, corresponding to
255 in the 24-bit color model).
<Green> Green content of the defined color.
Range:
0 (zero intensity, corresponding to a 0 in the 24-bit
color model) to 1 (full intensity, corresponding to
255 in the 24-bit color model).
<Blue> Blue content of the defined color.
Range:
0 (zero intensity, corresponding to a 0 in the 24-bit
color model) to 1 (full intensity, corresponding to
255 in the 24-bit color model).
<TraceStyle> SOLid | DASHed | DOTTed | DDOTted | DDDotted
Optional trace style, only for traces (
<DispEl>
> 12): One of the
string parameters
SOLid | DASHed | DOTTed | DDOTted
| DDDotted
.
<TraceWidth> Optional trace width, only for traces (
<DispEl>
> 12).
Range: 1 to 20
Example: *RST; :DISP:CMAP:MARK ON; :CALC:MARK ON
Create diagram area no. 1 (with default trace showing the S-
parameter S
21
) and a marker M1.
CALC:PAR:SDEF 'Trc2', 'S11'
DISP:WIND:TRAC2:FEED 'TRC2'
Create a trace named Trc2 and display the trace in diagram
area no. 1. Note that the new trace automatically becomes the
active trace.
CALC:MARK2 ON
Assign a marker M2 to the trace. Both markers are displayed
with the same color.
DISP:CMAP13:RGB 1,0,0; :DISP:CMAP14:RGB 0,1,0
Color the first trace red, the second trace green.
DISP:CMAP6:RGB?
Query the marker color. The marker color depends on the set-
tings made in previous sessions; it is not reset. A possible
response is
0,0,0
for black markers.
DISP:CMAP:MARK OFF
Change the marker colors: M1 turns red, M2 turns green.
Manual operation: See "Element" on page 533
The numeric suffixes
<DispEl>
denote the following display elements:
SCPI command reference
www.allice.de Allice Messtechnik GmbH