Allice Messtechnik R&S ZND, User Manual, Page: 545 / 1252

GUI reference
R&S
®
ZND
545 User Manual 1173.9557.02 ─ 61
For background information, see Chapter 5.1, "Function Keys and Softtools" ,
on page 232.
Remote command:
n/a
Conductance in Embedding Networks
Changes the presentation of "capacitance C<i> in parallel with resistance R<i>" circuit
blocks in lumped de/embedding networks (see
Chapter 4.6.2.3, "Circuit models for 2-
port networks" , on page 190 and Chapter 4.6.2.4, "Circuit models for 4-port networks" ,
on page 191).
If active, the resistance R<i> is displayed and specified as conductance G<i> (=1/
R<i>).
Remote command:
SYSTem:DISPlay:CONDuctances
n/a
Restart: Set all Traces to 0
Defines the behavior of the "Restart Sweep" function (see "Restart Sweep"
on page 383).
If unchecked (factory default) the previous measurement data are preserved. If
checked, they are deleted.
Remote command:
SYSTem:TRESet[:STATe]
Show X-Axis Grid Labels
If enabled, the firmware displays X-axis grid labels in cartesian diagrams with linear
scale.
Remote command:
SYSTem:DISPlay:XLABels
Number of Trace Colors
Defines the maximum number of trace colors (trace properties for the user defined
color scheme ).
Remote command:
SYSTem:DISPlay:TRACes:CCOunt
Decimal Places
Defines the number of fractional digits for quantities with different physical units. The
settings affect entries and results, e.g. the values in the marker lists.
Note: If your instrument is equipped with option R&S ZND-K19, 1 mHz Frequency
Resolution, set "Decimal Places" of unit "Hz" to 12 to utilize the high frequency resolu-
tion.
Remote command:
n/a
Setup softtool
www.allice.de Allice Messtechnik GmbH