manualshive.com logo in svg

Allice Messtechnik R&S ZND, User Manual, Page: 957 / 1252

Share
Download
Allice Messtechnik R&S ZND User Manual Download Page 957

Command reference

R&S

®

ZND

957

User Manual 1173.9557.02 ─ 61

Query parameters: 

<Detail>

CONNector | LABel | NAME | GENDer
Queried property

Return values: 

<Result>

Usage: 

Query only

[SENSe<Ch>:]CORRection:COLLect:CONNection<PhyPt> 

<ConnectorType>

Selects a connector type at a specified port 

<PhyPt>

 and its gender.

Tip:

 Use 

[SENSe<Ch>:]CORRection:COLLect:SCONnection<PhyPt>

 to select

an arbitrary connector type using a string variable.

Suffix: 

<Ch>

.

Channel number of the calibrated channel

<PhyPt>

Port numbers of the analyzer

Note:

 If the analyzer is set to use the same connectors at all

ports (

[SENSe<Ch>:]CORRection:COLLect:CONNection:

PORTs

 

ALL

), then a change of a connector type is valid for all

ports. The gender of the connectors can still be different.

Parameters:

<ConnectorType>

N50Female | N50Male | N75Female | N75Male | PC7 |
SMAFemale | SMAMale | PC35female | PC35male |
PC292female | PC292male | PC24female | PC24male |
PC185female | PC185male | S7_16female | S7_16male |
BNC50male | BNC50female | BNC75male | BNC75female |
UFEMale1 | UMALe1 | UFEMale2 | UMALe2
Connector type and gender of the connectors (omitted for
query). The R&S ZVR-compatible parameters 

UFEMALE1

 and

UMALE1

 denote the user-defined connector type "UserConn1",

UFEMALE2

 and 

UMALE2

 denote the user-defined connector type

"UserConn2". The user-defined connector types must be defined
before being addressed by

[SENSe<Ch>:]CORRection:COLLect:
CONNection<PhyPt>

.

*RST: 

N50FEMALE for all ports.

Example: 

*RST; :CORR:COLL:CONN1 N75MALE; CONN4?

Change the connector type at port 1 from N50FEMALE to
N75MALE. The connector type at the other ports is also
changed to N75, however, the gender (female) is maintained.

CORR:COLL:CONN4?

 returns 

N75FEMALE

.

Manual operation: 

See 

"Connector"

 

on page 243

SCPI command reference

www.allice.de

Allice Messtechnik GmbH

Summary of Contents for R&S ZND





































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































Reviews:

No comments