manualshive.com logo in svg

Allice Messtechnik R&S ZND, User Manual, Page: 629 / 1252

Share
Download
Allice Messtechnik R&S ZND User Manual Download Page 629

Command reference

R&S

®

ZND

629

User Manual 1173.9557.02 ─ 61

Parameters:

<Data>

Trace data either in ASCII or block data format, depending on
the current 

FORMat[:DATA]

 setting.

Parameters for setting and query: 

<Format>

FDATa | SDATa | MDATa | NCData | UCData | SCORr1 |
SCORr2 | SCORr3 | SCORr4 | SCORr5 | SCORr6 | SCORr7 |
SCORr8 | SCORr9 | SCORr10 | SCORr11 | SCORr12 |
SCORr13 | SCORr14 | SCORr15 | SCORr16 | SCORr17 |
SCORr18 | SCORr19 | SCORr20 | SCORr21 | SCORr22 |
SCORr23 | SCORr24 | SCORr25 | SCORr26 | SCORr27
See list of parameters below.

Example: 

*RST; SWE:POIN 20

Create a trace with 20 sweep points, making the created trace
the active trace of channel 1 (omitted optional mnemonic
SENSe1).

CALC:DATA? FDAT

Query the 20 response values of the created trace. In the FDATa
setting, 20 comma-separated ASCII values are returned.

CALC:DATA:STIM?

Query the 20 stimulus values of the created trace. 20 comma-
separated ASCII values are returned.

CALC2:PAR:SDEF 'Trc2', 'S11'

Create a second trace in a new channel no. 2. The second trace
does not become the active trace and is not displayed.

CALC:DATA:TRAC? 'Trc2', FDAT

Query the response values of the second (non-active) trace. 20
comma-separated ASCII values are returned.

CALC:DATA:ALL? FDAT

Query the response values of all traces. 40 comma-separated
ASCII values are returned.

Example: 

Writing memory traces

*RST; SWE:POIN 3

Create a data trace 'Trc1' with 3 sweep points, making the cre-
ated trace the active trace of channel 1 (omitted optional mne-
monic SENSe1).

TRAC:COPY 'MemTrc1','Trc1'; :CALC:PAR:SEL
'MemTrc1'

Copy the data trace to a memory trace and select the memory
trace as an active trace.

CALC:DATA SDAT, 1,2, 3,4, 5,6

Write numbers (1,2), (3,4), (5,6) to the memory trace.

CALC:DATA? SDAT

Query the memory trace. The response is 1,2,3,4,5,6.

FORM REAL,32

Change the data format to 4-byte block data.

CALC:DATA SDAT, #224123456789012345678901234

Write 24 bytes (= 4 * 2 * 3 bytes) of data to the memory trace.

SCPI command reference

www.allice.de

Allice Messtechnik GmbH

Summary of Contents for R&S ZND





































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































Reviews:

No comments