Allice Messtechnik R&S ZND, User Manual, Page: 414 / 1252

GUI reference
R&S
®
ZND
414 User Manual 1173.9557.02 ─ 61
Background information
Refer to the following sections:
●
Chapter 4.5.2, "Calibration standards and calibration kits" , on page 157
●
Chapter 4.5.5.3, "Characterization of calibration units" , on page 167
left = bidirectional R&S ZND
right = unidirectional R&S ZND
The buttons in the "Cal Devices" tab open the following dialogs:
●
"Cal Connector Types..." : See Chapter 5.11.2.1, "Cal Connector Types dialog" ,
on page 414
●
"Cal Kits...": See Chapter 5.11.2.2, "Calibration Kits dialog" , on page 417
●
"Characterize Cal Unit...": See Chapter 5.11.2.3, "Characterize Cal Unit dialog" ,
on page 422
For a unidirectional R&S
ZND this button is not available.
For a unidirectional R&S ZND (see Chapter 4.1.4.3, "R&S ZND: unidirectional vs. bidir-
ectional operation" , on page 80) calibration unit characterization is not available.
5.11.2.1 Cal Connector Types dialog
The "Cal Connector Types" dialog displays and modifies the list of available connector
types. Cal connector types must be selected in accordance with the connectors of the
measured DUT.
Access: CHANNEL – [CAL] > "Cal Connector Types..."
Cal softtool
www.allice.de Allice Messtechnik GmbH