Allice Messtechnik R&S ZND, User Manual, Page: 1074 / 1252

Command reference
R&S
®
ZND
1074 User Manual 1173.9557.02 ─ 61
Setting parameters:
<OutputCal> String parameter with the channel name (for <LocationOutput-
Cal>=CHANnel) or the calibration file name (for <LocationOut-
putCal>=POOL) of the resulting calibration.
Note: If (<OutputCal>,<LocationOutputCal>) matches one of the
input calibrations, this input calibration is replaced.
<LocationOutputCal> CHANnel | POOL
Return values:
<Joinable>
Manual operation: See "Input Calibration1/Input Calibration2/Cal Name"
on page 439
SYSTem:CORRection:WIZard[:IMMediate] <Dialogs>
Keysight-compatible command to open the Start Cal tab or the Calibration Kits dialog .
Tip: When working with the Chapter 6.1.2, "GPIB Explorer" , on page 588, switch to
raw mode ("Options">"Raw mode" in the IECWIN32 GUI) before executing this com-
mand.
Setting parameters:
<Dialogs> MAIN | CKIT
MAIN: open the "Calibration > Start Cal" softtool tab
CKIT: open the "Calibration Kits" dialog
Usage: Setting only
SYSTem:DATE <Year>, <Month>, <Day>
The command queries or defines the instrument's current date setting.
The setting command requires administrator rights; refer to "User accounts and pass-
word protection" on page 29.
Parameters:
<Year> Year, four-digit number
<Month> Month, two-digit number, 01 (for January) to 12 (for December)
<Day> Day, two-digit number, 01 to the number of days in the month
Example: SYST:DATE?
Response:
2012,05,01
- it is the 1st of May, 2012.
SYSTem:DFPRint?
Queries the device footprint. The device footprint contains detailed information about
the instrument and is mostly used for service purposes.
Usage: Query only
Manual operation: See "Save..." on page 554
SCPI command reference
www.allice.de Allice Messtechnik GmbH