Allice Messtechnik R&S ZND, User Manual, Page: 835 / 1252

Command reference
R&S
®
ZND
835 User Manual 1173.9557.02 ─ 61
<DispEl> Display Element
1 Background
2 Text
3 Selected Text
4 Grid
5 Reference Line
6 Same Color for all Markers
7 Vertical Range Lines
8 Diagram Title
9 Limit Fail Trace Color
10 Limit Line Type Off
11 Limit Line Type Upper
12 Limit Line Type Lower
13 to 12+N Trace properties 1 to N, where N is the number of trace colors configured using
SYSTem:DISPlay:TRACes:CCOunt
DISPlay:CMAP:TRACe:COLor[:STATe] <Boolean>
Defines the trace color schemes in different diagram areas.
Parameters:
<Boolean> OFF - independent color scheme in new diagram area. Moved
traces change their color.
ON - color scheme in new diagram area continues the previous
color scheme. Moved traces keep their color.
Example: *RST; :DISP:CMAP13:RGB 1,0,0
Create diagram area no. 1 (with default trace showing the S-
parameter S
21
) and color the trace red.
DISP:CMAP:TRAC:COL OFF; :DISP:WIND2:STAT ON
Select independent color schemes for new diagram areas. Cre-
ate a new diagram area no. 2.
CALC:PAR:SDEF 'Trc2', 'S11'; :DISP:WIND2:TRAC2:
FEED 'TRC2'
Create a new trace named Trc2 and display the trace in a new
diagram area no. 2. The new trace is red like the first trace.
DISP:CMAP:TRAC:COL ON; :DISP:WIND3:STAT ON
Continue the same color scheme in new diagram areas. Create
a new diagram area no. 3.
CALC:PAR:SDEF 'Trc3', 'S22'; :DISP:WIND3:TRAC3:
FEED 'Trc3'
Create a new trace named Trc3 and display the trace in a new
diagram area no. 3. The new trace is not red.
SCPI command reference
www.allice.de Allice Messtechnik GmbH